Cisco 642-354 Questions And Answers, 50% Discount Cisco 642-354 PDF Download On Our Store

Flydumps Cisco 642-354 material details are researched and created by the most professional certified authors who are regularly using current exams experience to create precise and logical dumps. You can get questions and answers from many other websites or books, but logic is the main key of success. And Flydumps will give you this key of success.

QUESTION 76
Which three command options does Call Home support? (Choose three.)
A. XML-destination
B. HTML-destination
C. short-txt-destination
D. full-txt-destination

Correct Answer: ACD Section: (none) Explanation
Explanation/Reference:
QUESTION 77
Refer to the exhibit.
Which three statements can you derive from the Summary View in Device Manager? (Choose three.)
A. Interface fc3/17 is connected to a loop device.
B. Ports 3 and 4 belong to PortChannel 4 and are connected to ports on switch 10.10.1.29.
C. The 10.10.2.19 switch is the local switch.
D. Ports 1 and 2 belong to PortChannel 2 and are connected to ports on switch 10.10.2.19.
E. This is a Cisco MDS 9216 switch.
F. Check the Host 2, Host, 3 and Host 4 can communicate with S1

Correct Answer: ABD Section: (none) Explanation
Explanation/Reference:
QUESTION 78
Drag Drop question A.

B.
C.
D.

Correct Answer: Section: (none) Explanation
Explanation/Reference:
Answer: Check certifyme eEngine, Download from Member Center
QUESTION 79
While attempting to merge two fabrics together with an E_port connection, the ISL fails to initialize. Entering show interface fc2/14 returns the following: fc2/14 is down (Isolation due to ELP failure). What are two valid troubleshooting strategies? (Choose two.)
A. Use show fctimer command to verify correct timer settings on each fabric.
B. Verify Rxbuffer size match on both ends of ISL.
C. Check domain IDs on each side of ISL to ensure they are unique.
D. Use Fabric Manager to verify active zone set is identical on both switches.

Correct Answer: AB Section: (none) Explanation
Explanation/Reference:
QUESTION 80
An administrator finds the following lines in the running configuration file: interface vsan1 ip address 10.10.10.3 255.255.255.0 no shut
A. the IP address on the management port, placing it in VSAN 1
B. a management VSAN on the switch
C. a common IP address to be shared by all GigE ports in VSAN 1
D. a default gateway for VSAN 1

Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 81
When configuring FCIP, packet fragmentation should be avoided in order to achieve optimal throughput. Fragmentation can be avoided by knowing which of the following?
A. MTU of the source IP interface
B. largest MTU in the path
C. smallest MTU in the path
D. MTU of the destination IP interface

Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 82
A customer has just replaced their third-party storage switches with Cisco MDS switches. They have noticed that the HP-UX hosts on their network lose connectivity to storage whenever their switches are rebooted. Which Cisco MDS feature will solve this problem?
A. FCID persistence
B. entire area FCID allocation
C. VSANs
D. LUN mapping

Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 83
What two commands must be executed on an MDS 9000 family switch in order to change a dynamically assigned Domain ID 5 to a static Domain ID 10 for VSAN 10? Choose two.
A. switch(config-if)# shut fcdomain 5
B. switch(config-if)# no shut fcdomain 10
C. switch(config)# fcdomain domain 10 static vsan 10
D. switch(config)# fcdomain restart vsan 10
E. switch(config)# fcdomain restart disruptive vsan 10

Correct Answer: CE Section: (none) Explanation
Explanation/Reference:
QUESTION 84
Drag Drop question A.

B.
C.
D.

Correct Answer: Section: (none) Explanation
Explanation/Reference:
Answer: Check certifyme eEngine, Download from Member Center
QUESTION 85
Refer to the exhibit. In the output of the show interface command, which two statements are correct? (Choose two.)

A. This is a Fibre Channel port running at 2 Gbps.
B. This port cannot be attached to any device.
C. This port is in slot 11 in the switch.
D. This port is in multiple VSANs.
E. This port mode is specific to MDS 9000 switches.

Correct Answer: BE Section: (none) Explanation
Explanation/Reference:
QUESTION 86
What protocol does Cisco Fabric Manager use to provide continuous health and event monitoring for the Cisco MDS 9000 family of switches?
A. SNMP
B. WEBM
C. SES
D. SMI-S

Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 87
Which two of these features are characteristic of out-of-band management for the Cisco MDS 9000 Series switches? (Choose two.)
A. CUP management of the switch for FICON
B. 10/100 Ethernet connection
C. IPFC
D. FCIP
E. logical interface VSAN 1
F. configuration during the initial switch setup

Correct Answer: BF Section: (none) Explanation
Explanation/Reference:
QUESTION 88
A customer would like to implement a low-cost traffic engineering solution that provides a primary data path, and a secondary data path that will only be used in the event of a failure in the primary path. Which of these solutions best meets the customer needs?
A. VSAN allowed list pruning
B. FCC
C. QoS
D. FSPF link costs

Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 89
If FCIP encryption and compression are both required, which of these sets of statements is true?
A. The sender should compress the data and then encrypt it. The receiver should decrypt the data and then uncompress it.
B. The sender should compress the data and then encrypt it. The receiver should uncompress the data and then decrypt it.
C. The sender should encrypt the data and then compress it. The receiver should uncompress the data and then decrypt it.
D. The sender should encrypt the data and then compress it. The receiver should decrypt the data and then uncompress it.

Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 90
Which two commands will display the control traffic output from Cisco Fabric Analyzer in a particular VSAN? (Choose two.)
A. switch(config)#fcanalyzer local brief display-filter(mdshdr.vsan==0x01)&&((fc.d_id==\”ff.ff.fe\”\|\|fc.s_is==\”ffcffcfe\”))
B. switch(config)#fcanalyzer local brief display-filter mdshdr.vsan==0x03e7
C. switch(config)#fcanalyzer local brief
D. switch#show fcs ie vsan 999
E. switch(config)fcanalyzer local limit brief

Correct Answer: AB Section: (none) Explanation
Explanation/Reference:
QUESTION 91
Drag Drop question

A.
B.
C.
D.

Correct Answer: Section: (none) Explanation
Explanation/Reference:
Answer: Check certifyme eEngine, Download from Member Center
QUESTION 92
Which three of these scenarios allow Write Acceleration configuration? (Choose three.)
A. using the Cisco MDS 9216i switch with the standard package license
B. using the Cisco MDS 9216i with an FCIP port as part of a PortChannel (SAN-OS Release 2.0)
C. using a Cisco MDS switch with an FCIP interface in a FICON VSAN
D. using the Cisco MDS 9120 switch with the standard package license for Fibre Channel Write Acceleration
E. using an SSM in an FCIP configuration with the initiator and target devices directly attached
F. using the Cisco MDS 9120 switch with the SAN extension license for FCIP Write Acceleration

Correct Answer: ABE Section: (none) Explanation
Explanation/Reference:
QUESTION 93
Which two of these commands display the full zone database on the local switch? (Choose two.)
A. show zone active
B. show zoneset active
C. show zone
D. show zoneset
E. show active zoneset

Correct Answer: CD Section: (none) Explanation
Explanation/Reference:
QUESTION 94
Choose the correct list of tasks to configure Remote Spanning.
A. Create a VSAN interface. Enable a Fibre Channel tunnel. Initiate the Fibre Channel tunnel. Configure the ST_Port in the source switch. Configure the SD_Port in the destination switch. Configure a SPAN session in the source switch.
B. Create a VSAN interface. Enable a Fibre Channel tunnel. Initiate the Fibre Channel tunnel. Configure the ST_Port in the source switch. Configure the SD_Port in the destination switch. Configure an RSPAN session in the source switch.
C. Create an RSPAN interface. Enable a Fibre Channel tunnel. Initiate the Fibre Channel tunnel. Configure the SD_Port in the destination switch. Configure the ST_Port in the source switch. Configure an RSPAN session in the source switch.
D. Create a VSAN interface. Enable a Fibre Channel tunnel. Initiate the Fibre Channel tunnel. Configure the ST_Port in the destination switch. Configure the SD_Port in the source switch. Configure an RSPAN session in the source switch.

Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 95
Switch 1 is configured to use the RADIUS server for authentication. Switch 2 is configured to use Switch 2
for authentication. Neither switch is configured to use local authentication.
What will happen if neither AAA server is reachable?
A. Both Switch 1 and Switch 2 will attempt local authentication.
B. Switch 1 will try to authenticate locally, Switch 2 will not attempt local authentication.
C. Switch 1 will not try to authenticate locally, Switch 2 will attempt local authentication.
D. Neither switch will attempt local authentication.

Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 96
Fabric merge failures are typically caused by which three configuration errors? (Choose three.)
A. unique domain IDs
B. VSAN missing from one switch
C. incompatibility in the active zone databases
D. connecting ports incorrectly configured as TE
E. incorrect VSAN allow list on ISL
F. preferred domain IDs

Correct Answer: BCE Section: (none) Explanation
Explanation/Reference:
QUESTION 97
You are attempting to connect a new host to the fabric, but the Fx port fails to initialize. Entering the command show interface fc7/31 returns the following: fc7/31 is down (Link_Failure or not connected). What are three valid troubleshooting strategies? (Choose three.)
A. verify FCOT is present
B. use show fctimer command to verify fabric timer values
C. verify MDS switchport speed
D. verify physical fiber connections
E. verify the switch port type is not set for E
F. use Fabric Analyzer to verify FLOGI from E_port

Correct Answer: ACD Section: (none) Explanation
Explanation/Reference:
QUESTION 98
Refer to the exhibit. Given the Cisco Fabric Manager output, which of these problems might occur if no zoning is configured?

e
A. There will be VSAN isolation on EISLs.
B. Zone merges with other MDS switches will fail.
C. Device security enforced by switch zoning will not occur.
D. No end devices will be able to communicate.

Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 99
Which of these utilities provides the ability to configure and manage zones on a Cisco MDS switch?
A. Cisco Fabric Manager
B. Cisco Device Manager
C. Cisco Performance Manager
D. Cisco Traffic Analyzer

Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 100
Which four statistics can be generated with the Traffic Analyzer? (Choose four.)
A. CPU load statistics
B. overall network statistics
C. session-based statistics
D. N_Port-based statistics
E. VSAN-based statistics
F. FC framing errors ASIC utilization statistics

Correct Answer: BCDE Section: (none) Explanation
Explanation/Reference: QUESTION 101
A customer has purchased the MDS 9216i with an IPS module. The IPS module is used for FCIP
connectivity.
Which of these licenses will the customer need to purchase?

A. Standard Package
B. Enterprise Package with additional SAN extension over IP Package
C. SAN Extension over IP Package
D. 2 SAN Extension over IP Packages

Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 102
Which of these is an appropriate use for the SAN extension tuner?
A. determine the average number of I/Os in an active FCIP tunnel
B. determine the number of outstanding I/Os currently used in an active FCIP tunnel
C. determine the number of outstanding I/Os needed to maximize FCIP throughput
D. report the maximum size of packets for optimized FCIP tunnels
E. automatically adjust FCIP parameters to improve tunnel performance

Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 103
A customer has reported performance degradation in the SAN. The system administrator would like to track read-write I/O and LUN use on several devices. The devices are directly connected to various switches and belong to different VSANs. The administrator wants to gather information for the last 72 hours.
Which MDS 9000 tools should the administrator acquire and configure?
A. Fabric Manager, Performance Manager, Cisco Traffic Analyzer, PAA, Fabric Manger Web Services
B. Fabric Manager, Fabric Manager Server License, Fabric Manager Web Services, Performance Manager, Cisco Traffic Analyzer, PAA
C. Fabric Manager, Performance Manager, Cisco Traffic Analyzer, PAA
D. Fabric Manager Server, Performance Manager, Cisco Protocol Analyzer, PAA

Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 104
What features can be enabled to remotely monitor an MDS fabric?
A. Syslog
B. SNMP
C. Port Analyzer Adapter
D. Radius
E. Call Home

Correct Answer: ABE Section: (none) Explanation
Explanation/Reference:
QUESTION 105
Which of these applications would be better suited for SAN rather than NAS deployment?
A. source code control system
B. database
C. office productivity suite
D. e-mail

Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 106
Refer to the exhibit. Which of the following statements is true?
A. All users belonging to the sangroup role are allowed to perform all configuration commands except fspf commands because the deny config feature fspf is listed first.
B. All users are allowed to perform all configuration commands because the permit config command is listed last and that will globally override all other rules.
C. All users belonging to the sangroup role to perform all configuration commands except fspf commands because it does not matter what order the rules are entered.
D. The configuration is not valid because rules are entered at the switch (config-role-vsan)# level.

Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 107
Which two security protocols are supported in the Cisco iSCSI implementation? (Choose two.)
A. IPSec
B. FC-SP
C. SLAP
D. CHAP
E. PAP

Correct Answer: AD Section: (none) Explanation
Explanation/Reference: QUESTION 108
The HBA on your storage server only supports the NL FC mode. Which interface type on the MDS 9000 Series fabric switches can support this HBA?
A. SD
B. TE
C. FL
D. N
E. ST

Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 109
Which three commands will display the members of a particular zone or zones? (Choose three.)
A. switch# show zone vsan 1
B. switch# show zone member pwwn 21:00:00:20:37:9c:48:e5
C. switch# show zoneset vsan 1
D. switch# show zone name Zone1
E. switch# show zone statistics
F. switch# show zone membership

Correct Answer: ACD Section: (none) Explanation
Explanation/Reference:
QUESTION 110
Refer to the exhibit.
Host H1 cannot communicate with Storage S1 in VSAN 200, but Host H4 can communicate with Storage
S4. Which three of these configurations or connections should you verify? (Choose three.)
e
A. The administrative state of the Host H1 interface on Cisco MDS 9216_1a is Active
B. The VSAN 200 membership includes Host H1 pWWN 20:06:00:0b:fd:60:6a:c0 and Storage S1 pWWN 20:02:00:60:46:18:0a:91.
C. TE ports on links between both Cisco MDS 9216 switches and the Cisco MDS 9509 allow VSAN 200.
D. The FSPF costs on Port Channel 1 and Port Channel 2 are equal.
E. Check cabling between Host H1 and Storage S1.
F. The link cost for PC1

Correct Answer: ABE Section: (none) Explanation
Explanation/Reference:
QUESTION 111
A proposed SAN design does not give the customer enough throughput between Cisco switches. The customer is familiar with the concept of aggregating links, therefore the Cisco SAN engineer proposes configuring PortChannels.
What is the maximum number of interfaces that can be configured into a PortChannel per switch (x) and the maximum number of PortChannels per switch (y) supported by the Cisco MDS 9000 Family of switches?
A. x=16, y=112
B. x=10, y=256
C. x=8, y=128
D. x=2, y=32

Correct Answer: A Section: (none) Explanation

FLYDUMPS Cisco 642-354 exam sample questions offer clarifications and additional guidance and address evolving Huawei requirements not previ-ously addressed in Cisco 642-354. This new version updates the standards to keep pace with emerging threats, technology evolution, and changes in the market. Through Cisco 642-354 exam sample questions, administrators are alerted when storage capacity is low and presented an option to move virtual machines to a storage volume with more capacity to prevent an unscheduled outage of the virtual machines. The FLYDUMPS Huawei solutions address both IT efficiency and business agility.

You may also like...