Cisco 640-822 Certification Material Provider,Download Latest Cisco 640-822 Dumps With 100% Pass Rate

With Flydumps Cisco 640-822 practice tests, you can pass the exam easily and go further on Microsoft career path.The Cisco 640-822 Flydumps are authenticated by expert and covering all aspect of Cisco 640-822 exam. Visit www.Flydumps.com to get the Cisco 640-822 100% pass ensure!

QUESTION 66
What objective does an IDS accomplish?
A. hide the private IP addressing structure from outside attackers
B. perform stateful firewall functions
C. detect malicious traffic and send alerts to a management station
D. block suspicious network activity from entering the network

Correct Answer: C
QUESTION 67
The certways administrator is concerned with enhancing network security. To do this, what are two recommended ways of protecting network device configuration files from outside security threats on the network?(Choose two.)
A. Always use Telnet to access the device command line because its data is automatically encrypted.
B. Use a firewall to restrict access from the outside to the network devices.
C. Allow unrestricted access to the console or VTY ports.
D. Use SSH or another encrypted and authenticated transport to access device configurations.
Correct Answer: BD
QUESTION 68
Choose from the following the effect of using the service password-encryption command.
A. Only the enable password will be encrypted.
B. It will encrypt all current and future passwords.
C. Only the enable secret password will be encrypted.
D. Only passwords configured after the command has been entered will be encrypted.

Correct Answer: B
QUESTION 69
To protect network device configuration files from outside network security threats, what should you do? (Choose two.)
A. Allow unrestricted access to the console or VTY ports.
B. Use a firewall to restrict access from the outside to the network devices.
C. Use SSH or another encrypted and authenticated transport to access device configurations.
D. Always use Telnet to access the device command line because its data is automatically encrypted.

Correct Answer: BC
QUESTION 70
Match the corresponding command and configuration task. (Not all options are used.)
1.
login password certways1

2.
enable password certways2

3.
enable secret certways4

4.
service password-encryption

5.
line vty 0 4 password certways5

6.
line console 0 password certways3
A. encrypt all clear text passwords II.protect access to the user mode prompt III.set privileged mode encrypted password IV.set password to allow Telnet connections
B. set privileged mode clear text password
C. I-4,II-3,III-5,IV-2,V-6
D. I-4,II-5,III-3,IV-2,V-6
E. I-4,II-6,III-3,IV-5,V-2
F. I-4,II-6,III-5,IV-3,V-2

Correct Answer: C
QUESTION 71
You need to create a security plan for the certways network. What should be part of a comprehensive network security plan?
A. Delay deployment of software patches and updates until their effect on end-user equipment is well known and widely reported.
B. Physically secure network equipment from potential access by unauthorized individuals.
C. Encourage users to use personal information in their passwords to minimize the likelihood of passwords being forgotten.
D. Allow users to develop their own approach to network security.
Correct Answer: B
QUESTION 72
Topic – Implement and verify WAN links.
Describe different methods for connecting to a WAN Configure and verify a basic WAN serial connection
A.
B.
C.
D.

Correct Answer:
QUESTION 73
You need to create a security plan for the certways network. What should be part of a comprehensive network security plan?
A. 64 Kbit/sec
B. 32 Kbit/sec
C. 512 Kbit/sec
D. 128 Kbit/sec

Correct Answer: C
QUESTION 74
Look at the following exhibit. You are a network administrator for certways. You are configuring P4S-R to connect to a non-Cisco network. Which two commands would be applied to the S0/0 WAN interface, but not to the Fa0/0 LAN interface? (Choose two.)

A. ip address
B. no shutdown
C. encapsulation ppp
D. authentication pap

Correct Answer: CD
QUESTION 75
Look at the following exhibit. You are a network administrator for certways.You want to make each connection that is identified by the numbers shown. What kind of cable should be used?

A. 1 – Ethernet crossover cable 2 – Ethernet straight-through cable 3 – fiber optic cable 4 – rollover cable
B. 1 – Ethernet straight-through cable 2 – Ethernet crossover cable 3 – serial cable 4 – rollover cable
C. 1 – Ethernet straight-through cable 2 – Ethernet straight-through cable 3 – serial cable 4 – rollover cable
D. 1 – Ethernet rollover cable 2 – Ethernet crossover cable 3 – serial cable 4 – null modem cable

Correct Answer: C
QUESTION 76
Which of the following are included WAN data link encapsulation types? (Choose two.)
A. DSL
B. T1
C. PPP
D. Frame Relay

Correct Answer: CD
QUESTION 77
Part of the certways WAN is shown below:
Two buildings on the Los Angeles campus of a small company must be connected to use Ethernet with a
bandwidth of at least 100 Mbps. The company is concerned about possible problems from voltage
potential differences between the two buildings. Which media type should be used for the connection?
A. coaxial cable
B. UTP cable
C. STP cable
D. fiber optic cable

Correct Answer: D QUESTION 78
John works as a network administrator. It is difficult for him to establish a serial link between a Cisco router
and a router from another vendor. Both routers are configured for HDLC encapsulation.
Which two options are correct about this configuration? (Choose two.)

A. The Cisco HDLC frame uses a proprietary “Type” field that may not be compatible with equipment of other vendors.
B. Usernames must be configured at both ends of the HDLC serial link
C. PPP encapsulation is recommended for serial links between equipment from multiple vendors.
D. HDLC requires a clock rate to be configured on the routers at both ends of the serial link.

Correct Answer: AC QUESTION 79
Which two characteristics belong to a Frame Relay point-to-point subinterface? (Choose two.)
A. requires the frame-relay map command
B. resolves NBMA split horizon issues
C. maps one IP subnet across multiple DLCIs
D. maps one IP subnet per DLCI

Correct Answer: BD QUESTION 80
Examine the following technologies, which one will you use when a router connected to a LAN has only one WAN interface, but multiple virtual circuits are needed?
A. DSL
B. ADSL
C. Cable
D. Frame Relay

Correct Answer: D QUESTION 81
As a network administrator, you will need to decide on the appropriate network devices to use. Which of the following correctly describes the roles of devices in a WAN? (Choose three)
A. A CSU/DSU terminates a digital local loop.
B. A CSU/DSU terminates an analog local loop.
C. A modem terminates a digital local loop.
D. A modem terminates an analog local loop.
E. A router is commonly considered a DTE device.

Correct Answer: ADE
QUESTION 82
The certways WAN connection is shown below:
Based on this diagram shown above, which two devices can be used to complete the connection between
the WAN router at the customer site and the service provider? (Choose two.)
A. multiplexer
B. ATM switch
C. CSU/DSU
D. modem

Correct Answer: CD
QUESTION 83
Host P4S-F, which needs to build the packet, has received the ARP reply. Two of the following information will be placed in the header of the packet that leaves host P4S-F if host P4S-F is to communicate with the WWW server. What is it? (Choose two)

A. The source address will be the IP address of host P4S-F.
B. The destination address will be the IP address of the WWW server.
C. The destination address will be the IP address of interface Fa0/0 of router P4S-SFX.
D. The destination address will be the IP address of interface Fa0/0 of the P4S-ILM router.

Correct Answer: AB
QUESTION 84
As it is shown in the exhibit, two World Wide Web documents from the WWW server Host are displayed by P4S-F in two browser windows at the same time. How did the data find its way to the correct browser windows?

A. The browsers track the data by the URL.
B. TCP port numbers are used to direct the data to the correct application window.
C. The OSI application layer tracks the conversations and directs them to the correct brower.
D. The IP source addresses of the packets will be used to direct the data to the correct browser window.

Correct Answer: B
QUESTION 85
You work in a medium-sized company .The network performance of your company has slowed to the point that users are complaining. In order to resolve this problem, You are asked to determine what the users might be doing to cause the slowdown. Which two types of network services or applications most likely cause slowdown? (Choose two.)
A. social networking web sites
B. blogs and other online browsing
C. PC-based VoIP services
D. online video sites

Correct Answer: CD
QUESTION 86
Look at the following exhibit. Connection problems are reported in the internetwork. By the output from P4S-HostA, what is the problem indicated?

A. The routing on P4S-R2 is not functioning properly.
B. The gateway address of P4S-HostA is incorrect or not configured.
C. The Fa0/24 interface of P4S-S1 is down.
D. An access list is applied to an interface of P4S-R3.

Correct Answer: B
QUESTION 87
Choose from the following three that are found in a TCP header, but not in a UDP header? (Choose three.)
A. window size
B. destination port
C. sequence number
D. acknowledgment number

Correct Answer: ACD
QUESTION 88
Match the corresponding commands and functions. (Not all options are used.) 1.ping 10.0.0.1 2.ping 127.0.0.1 3.tracert 4.ipconfig/all 5.arp -a 6.telnet
A. displays PC network configuration
II. displays the list of routers on a path to a network destination III.tests VTY configuration
IV. tests TCP/IP protocol stack
B. displays IP to MAC address mappings on a Windows PC
C. I-4,II-3,III-6,IV-2,V-5
D. I-4,II-3,III-1,IV-6,V-5
E. I-4,II-3,III-6,IV-5,V-2
F. I-4,II-3,III-5,IV-6,V-2

Correct Answer: A
QUESTION 89
Choose from the following two advantages of Layer 2 Ethernet switches over hubs. (Choose two.)
A. filtering frames based on MAC addresses
B. increasing the size of broadcast domains
C. decreasing the number of collision domains
D. allowing simultaneous frame transmissions

Correct Answer: AD
QUESTION 90
Data is divided into smaller pieces for transmission when files are transferred between a host and an FTP server. After these pieces reach the destination host, they should be reassembled to reconstruct the original file. What is used for the reassembly of these pieces into the correct order?
A. the TTL in the IP header
B. the sequence number in the TCP header
C. the Start Frame Delimiter in the 802.3 Preamble
D. the frame check sequence in the Ethernet frame trailer

Correct Answer: B

Cisco 640-822 Questions & Answers covers all the knowledge points of the real exam. We update our product frequently so our customer can always have the latest version of Cisco 640-822.We provide our customers with the excellent 7×24 hours customer service.We have the most professional Cisco 640-822 expert team to back up our grate quality products.If you still cannot make your decision on purchasing our product, please try our Cisco 640-822 free pdf

 

You may also like...